Tire Maintenance page1

Tip: Keep a low pressure tire gauge (0psi - 80psi) in your bike tool bag at all times. Try to remember to check your tire pressure everytime you fill up for gas.

Keep your tires correctly inflated. A tire that is very under-inflated generates a lot of heat which can lead to a blow out. Tires that run too hot also wear out more quickly. The most common motorcycle breakdown is for tire damage.

Purchase a pencil-type tyre gauge and use it regularly until you instinctively 'know' what your tyres feel like correctly inflated. Use of the gauge and visual inspections must become second nature.

Replace your tires sooner rather than later. If tread depth is 1-2mm it is time to replace your tires. Take a tip from the mad sportbikers and the canyon racers - they never skimp on their tyres as they are often all that stands between them and the pearly gates.

Dry Rotting- or "cracking." Usually means that the tires are old and/or the bike has not been in covered storage. Real "light" cracking may be ok, but basically if there is excessive dry rotting, you should get new tires.

Tires on motorcycles, like any vehicle, play a vital role in the performance, handling and safety of the bike. Many times we tend to ignore the necessary maintenance needed to keep the tires safe. With motorcycles, there are only two small contact patches for the rider to rely on, so it is extremely important to keep the tires in top condition.

Any tire, no matter how well constructed, may fail in use as a result of punctures, impact damage, improper inflation, overloading, or other conditions resulting from use or misuse. Tire failure may create a risk of property damage, serious personal injury or death. To reduce the risk of tire failure, we strongly recommend you read and follow all safety information contained in this brochure.

It is recommended that riders do a periodic inspection of their tires and have any imbedded objects removed by a qualified service person. Serious personal injury or death may result from a tire failure. Many tire failures are preceded by vibration, bumps, bulges or irregular wear. If a vibration occurs while riding your motorcycle, or you notice a bump, bulge or irregular wear, have your tires and motorcycle evaluated by a qualified service person.

It is not often that a properly maintained tire will "blow out" while you are riding. More commonly if air is lost, it will be gradual. If you do experience a blow out or sudden tire failure, the following information should be helpful: When the failure occurs, slowly decrease the amount of throttle, hold the handlebars firmly, and steer to maintain your lane position. Once the motorcycle has slowed and is fully under control, apply the brakes gently. Gradually pull over to the shoulder and come to a stop.